others

Open-Ear Earbuds

How to Put Earbuds in Pairing Mode: A Step-by-Step Guide for UK Users

18/04/2025

0 min read

Struggling to connect your wireless earbuds? Whether you’ve just unboxed a new pair or you're reconnecting to a new device, understanding how to put your earbuds into pairing mode is essential. In this UK-friendly guide, we’ll walk you through the process, offer troubleshooting tips, and help you get the most out of your audio experience.

Why Pairing Mode Matters

Before your bluetooth earbuds can connect to your phone, tablet, laptop, or smart TV, they need to enter pairing mode. This makes them visible to your device, enabling that smooth wireless connection we all love.

How to Put Most Earbuds into Pairing Mode

Different brands may vary slightly, but the core process is usually the same. Here's a general step-by-step guide:

Start with Earbuds Off If your earbuds power on automatically when removed from the case, place them back and hold the case lid open.
Hold the Power or Multi-Function Button Press and hold the button (usually for 3–5 seconds) until you see a flashing LED light — typically blue or white. This indicates pairing mode.
Open Bluetooth Settings on Your Device On your phone, go to Settings Bluetooth, and ensure it's turned on. Look for your earbuds under "Available Devices."
Select Your Earbuds Tap to pair. You may hear a voice prompt or tone confirming the connection.

Tip: If you’re using open earbuds with a companion app (like the Soundcore App), open it to check pairing status or perform firmware updates.

How to Put Specific Earbud Brands into Pairing Mode

Let’s break it down by some of the UK’s most popular earbud brands:

soundcore Most soundcore true wireless earbuds enter pairing mode when you press and hold the multifunction button or touch panel for 3 seconds while the earbuds are out of the case.
Sony Press and hold both earbuds' touch sensors until you hear "Bluetooth pairing."
Apple AirPods Place them in the case, open the lid, and press the small button on the back of the case until the LED flashes white.
Samsung Galaxy Buds Place them in your ears, then press and hold both touchpads until a beep confirms pairing mode.

Troubleshooting: When Pairing Mode Doesn’t Work

If your earbuds aren’t showing up:

Forget and Reconnect: On your device, go to Bluetooth settings and “Forget” the device, then try again.
Reset Your Earbuds: Most earbuds have a reset function. Check your user manual or the brand’s app.
Charge Up: Low battery can block pairing mode.
Try a Different Device: If they still won’t pair, test them with another phone or tablet.

Can’t Pair Both Earbuds Together?

This often happens with true wireless earbuds where one bud connects and the other doesn’t. Try these steps:

1. Put both buds back in the case.

2. Remove and reinsert them.

3. Perform a reset if needed.

4. Ensure they’re updated via the brand’s app.

Recommended soundcore Earbuds for Effortless Pairing

Looking to upgrade your earbuds after all that pairing hassle? Whether you're into immersive sound, outdoor runs, or all-day comfort, soundcore has you covered. Here are some of our top picks for UK listeners:

Liberty 4 Pro – For Noise Cancelling True-Wireless Earbuds

The soundcore Liberty 4 Pro utilizes seven sensors to detect noise from all directions, resulting in three times stronger noise reduction. They offer hi-fi sound with rich detail, ideal for music, podcasts, and movies. The case features a touch bar that enables easy fine-tuning of noise cancellation levels. Additionally, these earbuds support super-fast charging; a five-minute recharge provides four hours of playtime.

AeroClip - For Open-Ear Comfort on the Go

Say goodbye to ear fatigue with our innovative clip-on open earbuds. Ideal for outdoor runs or urban commutes where you want to stay aware of your surroundings without sacrificing audio quality.

AeroFit 2 - For Lightweight, Secure Fit

Built for everyday motion, AeroFit 2 delivers a stable, open-ear fit with ultra-lightweight comfort. Perfect for walks, light workouts, or all-day wear — especially if you want to stay aware of your surroundings without ear pressure or fatigue.

FAQ

How do I put my earbuds into Bluetooth pairing mode?

Most Bluetooth earbuds enter pairing mode when you press and hold the main button or touch sensor for 3–5 seconds. Look for a flashing LED light, usually white or blue. You can then select the earbuds in your phone’s Bluetooth settings.

What should I do if one earbud is not pairing?

Try placing both earbuds back in the charging case, then remove them again. If that doesn't help, reset the earbuds using the method described in the user manual or app. Also, make sure the earbuds are charged and clean.

Why won't my earbuds show up in Bluetooth settings?

Make sure your earbuds are in pairing mode and not already connected to another device. If the problem continues, reset the earbuds and turn Bluetooth off and back on again on your device.

Conclusion

Putting your earbuds in pairing mode is usually quick and easy once you know what to do. Whether you’re using them for your morning commute, work calls, or workouts, mastering Bluetooth pairing means better convenience and sound quality.Stay connected — and happy listening!

Best deals

Feature Products