soundcore Mini 3 | Mini Bluetooth Party Speaker
BassUp and PartyCast Technology for a Dazzling Pocket Party
- Pocket Party: Get 360° of ear dazzling audio squeezed into something smaller than a coffee cup.
- Your Sound, Your Rules: Connect via the soundcore app to take remote control of Mini 3. Power it on or off, adjust the volume, change the sound profile, and much more.
- Water Shmorter: IPX7 waterproofing says your pool and beach party can get as wild as you want it to. Or just listen worry-free in the bathroom and kitchen!
- Non-Stop Rocking: Party for 15 hours on a single charge.
- PartyCast Technology: Link 100+ Mini 3 (or any soundcore PartyCast speakers) to party into the next dimension.
Services and benefits
Want More Perks?
1. Priority Shipping2. Member Pricing on Selected Products 3. Birthday Gift4. Unlock Benefits with soundcoreCredits Learn More
Payment Method
soundcore Mini 3 | Mini Bluetooth Party Speaker
Sold Out
FAQ
Documents & Drivers
Partycast - As Master Speaker
1.Turn on Mini 3 - Connect to Phone via Bluetooth.
2.Once connected, press the Bluetooth button for at least 3-5 seconds until it begins flashing white
3. Connect additional SoundCore speakers using the instructions found with the other speakers. The light will remain flashing white at all times.
Partycast - As Secondary Speaker
1. Turn on Mini 3.
2. Press Bluetooth button for at least 3-5 seconds until it begins Flashing White.
3. Double Press Bluetooth Button to begin pairing to the master speaker. Allow the speaker to connect, it can take 2-5 seconds.
4. Once bluetooth light is solid white, speaker is successfully connected.
1.Turn on Mini 3 - Connect to Phone via Bluetooth.
2.Once connected, press the Bluetooth button for at least 3-5 seconds until it begins flashing white
3. Connect additional SoundCore speakers using the instructions found with the other speakers. The light will remain flashing white at all times.
Partycast - As Secondary Speaker
1. Turn on Mini 3.
2. Press Bluetooth button for at least 3-5 seconds until it begins Flashing White.
3. Double Press Bluetooth Button to begin pairing to the master speaker. Allow the speaker to connect, it can take 2-5 seconds.
4. Once bluetooth light is solid white, speaker is successfully connected.
Turn on the speaker, then hold Bluetooth and Vol+ for around 5-10seconds.
It is 5V/1A.
Yes,
It will Auto-turn off after 10 minutes when it is disconnected from the host devices and after 30 minutes when it is no audio signal input.
It will Auto-turn off after 10 minutes when it is disconnected from the host devices and after 30 minutes when it is no audio signal input.
Try using a different cable and wall charger to full charge the speaker. If possible, then press the power button for 10 seconds, then press it several times to see if that helps. Ideally, the charger should be 5V/1A.
1.Fully charge the speaker
2.Turn on and reset the speaker by holding Bluetooth and Vol+ for around 5-10seconds
3.Try the speaker with another device if possible;try another app or audio source
4.Ensure there are no physical objects hindering the Bluetooth connection from the speaker to the device they're connected to (such as a doorway or wall)
2.Turn on and reset the speaker by holding Bluetooth and Vol+ for around 5-10seconds
3.Try the speaker with another device if possible;try another app or audio source
4.Ensure there are no physical objects hindering the Bluetooth connection from the speaker to the device they're connected to (such as a doorway or wall)
Normally the charging time for this SoundCore mini 3 speaker should be around 3-4 hours with a 5V/1A wall charger. Below are the correct charging indicators:
Power on: Light up white
Low Power: Red flash
Charging: Red
Fully charged: White
Power on: Light up white
Low Power: Red flash
Charging: Red
Fully charged: White
Yes.
The SoundCore mini 3 speaker will come with a 60cm USB-C charging cable.
