Motion+ (Renewed)
Ultra-Wide Frequency Range for Remarkable Sound
-
The product works and looks new.
- This pre-owned product has been professionally inspected, tested, and cleaned.- There will be no visible cosmetic imperfections when held at an arm’s length.- Products with batteries will exceed 80% capacity relative to new.- Accessories may not be original but will be compatible and fully functional. The product may come in a generic box.- This renewed product comes with a 12-month warranty. - Hi-Res Audio: Motion+ is equipped with stunning Hi-Res Audio which is further enhanced by Qualcomm aptX for lossless music reproduction when streaming via Bluetooth.
- Huge Sound with Intense Bass: Packed with two Ultra high-frequency tweeters, neodymium woofers, and passive radiators to fill every corner of your room with 30W of rich sound. Low frequencies are enhanced in real-time by our exclusive bassuptm technology.
- Exceptional Depth and Clarity: Motion+’s Ultra-wide frequency range stretches from 50 Hz to 40 kHz and is paired with an advanced DSP to ensure all the details and idiosyncrasies of a song are faithfully reproduced.
- IPX7 Waterproof: Fully-waterproof casing provides an impenetrable barrier against liquids.
- 12-Hour Playtime: Motion+’s built-in 6, 700 mAh battery lets you effortlessly soundtrack wild weekends, cozy evenings, or long summer days outdoors.
-
Motion Plus speakers bought after November 2022 do not suppport TWS pairing with Motion Plus speakers purchased prior to November 2022.
Services and benefits
Want More Perks?
1. Priority Shipping2. Member Pricing on Selected Products 3. Birthday Gift4. Unlock Benefits with soundcoreCredits Learn More
Payment Method
Motion+ (Renewed)
Sold Out
FAQ
How-To Videos
Operation
1. Go into the app and press 'Update Firmware’.
2. Motion+ will restart twice during the installation process.
- It will automatically restart after the first Bluetooth upgrade.
- During the second upgrade the power light will flash for about 10 seconds and then automatically restart.
2. Motion+ will restart twice during the installation process.
- It will automatically restart after the first Bluetooth upgrade.
- During the second upgrade the power light will flash for about 10 seconds and then automatically restart.
Hold the Bluetooth and Volume+ buttons down at the same time for 5-10 seconds until Motion+ restarts.
Charging
If you haven't charged or used Motion+ in a long time the battery may have over-discharged. Charge for at least one hour before turning on.
Charging when powered on:
- Steady red light while charging
- Steady white light when fully charged
Charging when powered off:
- Steady red light when charging
- Light turns off when fully charged
- Steady red light while charging
- Steady white light when fully charged
Charging when powered off:
- Steady red light when charging
- Light turns off when fully charged
Bluetooth
1. Clear all the pairing records on your device.
2. Turn the Bluetooth on and off on your device.
3. Hold down the Bluetooth and Volume+ button at the same time for 5-10 seconds until Motion+ restarts.
4. Search for Motion+ in your device's Bluetooth menu and pair.
2. Turn the Bluetooth on and off on your device.
3. Hold down the Bluetooth and Volume+ button at the same time for 5-10 seconds until Motion+ restarts.
4. Search for Motion+ in your device's Bluetooth menu and pair.
1. Avoid placing any electronics devices in between the two Motion+ speakers when they are in stereo pairing mode.
2. Ensure the distance between the two speakers is no greater than 16 ft /5 m.
3. Put the master speaker on the right and the secondary speaker on the left.
2. Ensure the distance between the two speakers is no greater than 16 ft /5 m.
3. Put the master speaker on the right and the secondary speaker on the left.
MacBook:
1. Open 'Bluetooth' in settings and find 'soundcore Motion+' in the list of available devices.
2. Connect Motion+ to your MacBook.
3. Open 'Sound' to confirm that the Motion+ is the default for all sound. If it is not the default, change the settings.
Windows Laptops:
1. Open 'Bluetooth' in settings and find 'soundcore Motion+' in the list of available devices.
2. Connect Motion+ to your laptop.
3. Open 'Sound' to confirm that the Motion+ is the default for all sound.
1. Open 'Bluetooth' in settings and find 'soundcore Motion+' in the list of available devices.
2. Connect Motion+ to your MacBook.
3. Open 'Sound' to confirm that the Motion+ is the default for all sound. If it is not the default, change the settings.
Windows Laptops:
1. Open 'Bluetooth' in settings and find 'soundcore Motion+' in the list of available devices.
2. Connect Motion+ to your laptop.
3. Open 'Sound' to confirm that the Motion+ is the default for all sound.
Sound
Go to the EQ settings in the soundcore App and adjust as needed.
Update firmware to the latest version via the soundcore app.
BassUp is a separate EQ mode on Motion+. Use the soundcore App to switch back to your Custom EQ setting.
Ensure you are facing the microphone when making calls. It is located next to the BassUp button.
Documents & Drivers
