P2 (Generalüberholt)

About 2 hours.
After exercise, wipe the charging port dry with a cotton cloth to ensure there's no sweat on the port before charging.

1. Make sure the protective film below the earbud has been removed.
2. Try another charging cable and wall charger to charge the case with the earbuds in it. There will be one steady white light on the case while it's charging and a steady white light on each earbud to indicate the earbuds are charging in the case. The light will turn off when they are fully charged.
3. Clean the charging pin with a dry cloth, then put the earbuds into the charging case, and charge the case and earbuds with the charging cable at least for 10 minutes.

The light on the charging case only lights up when it has less than 10% battery life (red indicator) or when the case is charging (white indicator).

No.

1. Place the earbuds into the charging case and make sure they are being charged.
2. Press and hold the button on both earbuds for 3 seconds. The LED indicators will flash red 3 times and then turn white.

1) Ensure your device's Bluetooth setting is enabled and your device is within 1 m (3 ft).
2) Clear the Bluetooth connection record on your phone and re-pair.
3) Reset your earbuds. See "How do I reset Life P2?"
4) Try to pair with another device.

1. Reset the earbuds. See "How do I reset Life P2?".
2. While the range of most Bluetooth devices is 33 feet (10 meters), the optimal range for any Bluetooth audio device is about 2 feet (60 centimeters) from the audio source.
3. Some environments (such as airports, offices, crowded public spaces etc.), other Bluetooth connections, and Wi-Fi can interfere with your Bluetooth connection. Optimizing your Bluetooth connection:
- If you are in a busy place, ensure your phone is on your right side when using Life P2.
- Download videos and songs instead of streaming.
- If you have an Android phone, temporarily disable unnecessary apps running in the background.
- Stay away from Wi-Fi transmitters.

- Normally, when the primary earbud is turned off you'll need to wait 3-4 second for the secondary earbud to automatically connect to your device.
- If it doesn't connect, you can manually connect by clicking on the secondary earbud's Bluetooth name in your phone's Bluetooth list.
- If this doesn't work, reset the earphones. See "How do I reset Life P2?".

1. Turn off Bluetooth on the currently connected device and then connect another Bluetooth device.
2. Or hold down the button on either earbud for 3 seconds to turn it off first, and then turn on Bluetooth on another device and hold the button on either earbud until you see the white light flashing quickly.

Life P2 supports aptX, SBC, and AAC.

Yes, simply remove one earbud from the charging case while the other is charging.
If the earbud has not previously been connected to your device, manually click the earbud's Bluetooth name on your device to pair it to use.

1) Place both earbuds back in the charging case and close it, then take them both out and try again.
2) If this doesn't work, then reset your earbuds. See "How do I reset Life P2?"

1. Delete the pairing record and reconnect Life P2 again.
2. You may need to change the default audio output on your PC to "Bluetooth Headset".
3. Update your computer's Bluetooth driver or buy a Bluetooth adapter that is compatible with your computer.

Only one headset microphone works during the call. If you want to switch from stereo to mono call, press and hold the button on the earbud in your ear for one second while removing the other earbud.

When you use Life P2 for the first time the right side is the primary earbud and the left is the secondary by default. Wait for soundcore Life P2-L (or headset on some devices) pairing request and click “pair”. If you click "cancel" this will not affect your use of the earbuds in stereo mode, but will affect your ability to switch between stereo and mono mode.

Ways to Switch:
1. Place either one of the earbuds in the charging case or hold down the button on one earbud to turn it off manually, you can keep using the other one.
2. If either one of the earbuds is out of battery and powered off, you can keep using the other one.

Notes:
- For iPhone 11 Series: Manually switch between the primary and secondary earbuds by clicking on the Bluetooth name of the secondary earbud on your device.
- When you switch from stereo to mono, the audio will pause. Within 2-4 seconds Life P2 will connect again so press play to continue listening.
-If switching to mono mode fails, clear Life P2 from your phone's Bluetooth connection record and pair again.

The earbuds have an IPX7 Waterproof rating under IEC standard 60529, which means they are designed to handle rain and workout conditions. The earbuds are not designed for swimming, showering, or exposure to pool or ocean water. Do not wear the earbuds in a sauna or steam room.

Note: The waterproof function's effectiveness may reduce over time as a result of daily use.

No, the case is not waterproof. Wipe the earbuds dry with a dry, lint-free cloth after workouts, heavy sweating, or getting splashed with water. Ensure the earbuds are completely dry before placing them in the charging case.

The product must not be disposed of in your household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of old products and rechargeable batteries in your normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health. Please note that the battery should only be removed by professional engineers. You are welcomed to contact us at service@soundcore.com if you have any questions.