Motion Boom Plus (odnowiony)

1. Connect your device to Motion Boom Plus.
2. Open the soundcore app.
3. Press "..." in the top right corner to access more options.
4. Turn off voice prompts.

1. Open the soundcore app and press 'Update Firmware'.
2. Do not use your phone while the firmware is updating, except if you’ve set the soundcore app to run in the background.
3. Motion Boom Plus will restart automatically after upgrading.

Turn on the speaker, then hold the Bluetooth and Volume + buttons for 5-8s.

If you haven't charged or used Motion Boom Plus in a long time, the battery may be over-discharged. Charge for at least one hour before turning it on.

No, Motion Boom Plus can float on the surface of the water.

1. Turn on 2 Motion Boom Plus speakers and connect either one to your device via Bluetooth.
2. Hold the Bluetooth button for 2-3s on both speakers until they flash white.
3. Wait for 3-5s until you hear 'ding' sound. This means they are successfully paired.
4. Once paired, the primary speaker will show a solid blue light, while the secondary speaker will show white light.

Yes.

1. Turn on 2 Motion Boom Plus speakers and connect one to your device via Bluetooth.
2. Press the PartyCast button on both speakers and you will see a solid white light.
3. Wait for 3-5s until you hear a 'ding' sound. This means they are successfully paired.
4. Once paired, the primary speaker will show solid white light, while the secondary speaker will show white light.

- Solid red light while charging.
- Solid white light when fully charged.

Yes. There is a USB-A port for charging other devices.

You can use a USB-C wall charger with 5V/3A output to recharge.

By using a 5V/3A USB-C wall charger, you can recharge to 100% in 5.5 hours.

To fix the charging issue, you can try the following steps:
1. Wipe clean the tip of the charging cable.
2. Try using a different cable or wall charger (5V/3A output) to recharge the speaker.
3. Reset the speaker.
4. Recharge for at least half an hour to prevent over-discharge.

It means the battery is low.

1. Confirm that the speaker is fully charged and not paired with other devices.
2. Forget all Bluetooth pairing records on your device.
3. Reboot your speaker and your device.
4. Disable and enable Bluetooth on your device.
5. Reset the speaker.
6. Try to connect the speaker to another device.

A PIN or password is not needed when pairing a soundcore speaker with a device. Hence, if you encounter an issue during the pairing process, please try these steps:
1. Confirm that soundcore Motion Boom Plus is fully charged and not connected to other devices.
2. Forget all Bluetooth pairing records on your device.
3. Reboot your soundcore Motion Boom Plus and your device.
4. Disable and then enable Bluetooth on your device.
5. Reset soundcore Motion Boom Plus by holding the Bluetooth and Volume+ buttons at the same time for 5-10s until Motion Boom Plus restarts.
6. Connect soundcore Motion Boom Plus to a different device.

1. Confirm that the speaker is fully charged. 2. Reset the speaker. 3. Reboot your speaker and your device. 4. Try connecting the speaker to another device. If possible, try using another app or audio source. 5. Ensure there are no physical objects interfering with the Bluetooth connection from the speaker to the device, such as a doorway or wall.

1. Confirm that the speaker is fully charged.
2. Reset the speaker.
3. Restart your speaker and the device it is paired with to test again.
4. Try connecting the speaker to a different device. If possible, try another app or audio source.
5. Make sure the volume on both the speaker and the paired device are turned up.

Double press the PartyCast button on soundcore Motion Boom Plus.