Boom 2 | Enceinte Bluetooth portable avec basses
Profitez de basses puissantes avec l'enceinte Bluetooth avancée pour l'extérieur.
129,99 €
Couleur
- Basses de 80W max : Ressentez la puissance des basses dans chaque son grâce à un caisson de basses de compétition plus grand de 50 % pour plus de profondeur et de netteté. Et avec BassUp️ 2.0, vous pouvez régler l'égalisation des basses et les monter à un maximum de 80w.
- 2.1 stéreo nette : Un caisson de basse de 40 W et deux hauts parleurs de 10 W offrent des aigus nets et des basses profondes, équilibrés par une technologie de crossover intelligente, pour une expérience audio immersive.
- Écoutez toute la journée où que vous soyez : vous pouvez écouter votre musique pendant 24 heures avec une seule charge, et grâce au PowerBank intégré, vous pouvez garder votre téléphone sous tension où que vous soyez.
- Étanchéité IPX7 et flottabilité : conçu pour faire face à toutes les aventures, vous pouvez l'emmener à la plage, au bord de la piscine ou sous la pluie sans craindre de l'abimer.
- Votre son à votre façon : Utilisez l'égaliseur professionnel pour trouver le son parfait pour n'importe quel morceau ou ambiance. Et avec PartyCast 2.0, vous pouvez connecter jusqu'à plus de 100 enceintes pour faire passer la fête au niveau supérieur.
Ce que nous offrons

Expédition rapide

Garantie sans souci

Garantie de remboursement de 30 jours

Assistance à la clientèle à vie
Vous voulez plus d'avantages ?
1. Expédition prioritaire2. Prix pour les membres sur certains produits3. Cadeau d'anniversaire4. Débloquer des avantages avec soundcoreCredits En savoir plus
Payment Method
Boom 2 | Enceinte Bluetooth portable avec basses
129,99 €



FAQ
General
1. soundcore Boom 2 Speaker
2. 60 cm USB-C to C Cable
3. Quick Start Guide
Note: Wall charger not included.
Boom 2 supports up to 24 hours of playtime at 50% volume with BassUp and light effects turned off. Battery life will vary depending on the content being played, custom EQs, volume level, etc
The power indicator is red when charging and white when fully charged. When the battery level is below 10%, the power button indicator light will flash red.
soundcore Boom 2 features IPX7 waterproofing and floating, but before submerging it in water, make sure to seal the waterproof cover tightly.
It takes around 5.5 hours to charge with a certified 5V/3A (15W) wall charger.
Boom 2 has a built-in woofer and two tweeters.
No.
60W as standard, but it can reach up to 80W in BassUp 2.0 mode.
On Boom 2, BassUp 2.0 not only boosts the bass at the touch of a button, but also
increases the speaker's output to 80W.
Turn on Boom 2, then hold down the Bluetooth and Volume + buttons for 5-10 seconds.
You'll hear a prompt and the speaker will automatically restart
Yes, Boom 2 is equipped with a microphone.
Boom 2 has a 5W charging output.
Boom 2 supports the SBC Bluetooth codec.
Bluetooth 5.3.
Bluetooth Related
TWS stands for True Wireless Stereo, and it allows two identical speakers to play stereo sound after pairing up. soundcore Boom 2 supports TWS.
1. Turn on both speakers,
2. Long press the Bluetooth button on both speakers until the indicator light flashes
white.
3. You'll hear a sound to indicate successful pairing. The indicator light on the main
speaker will be blue, and the indicator light on the secondary speaker will be white. The
main speaker functions as the left channel, and the secondary speaker functions as the
right channel.
PartyCast 2.0 lets you connect up to 100+ PartyCast-enabled Bluetooth speakers. Boom 2 supports PartyCast 2.0 functionality.
1. Turn on two PartyCast 2.0 devices.
2. Press the PartyCast button on each device, and the indicator light will turn white.
3. You'll hear a prompt indicating successful pairing.
1. Turn on the Boom 2 and connect it to your phone.
2. Turn on the secondary speaker, ensuring that it is not connected to the phone.
3. Briefly press the PartyCast button on the main speaker until you hear a prompt, then
immediately press the PartyCast button twice quickly to revert to PartyCast 1.0.
4. Long press the Bluetooth button on the secondary speaker to enter PartyCast pairing
mode. At this point, the Bluetooth indicator light will change from flashing blue to
flashing white. Double-press the Bluetooth button to enter PartyCast secondary speaker
mode, and the Bluetooth indicator light will change from slow flashing white to fast
flashing white.
5. When the secondary speaker's Bluetooth light turns white, PartyCast pairing is
successful.
1. Turn on both speakers.
2. Press the PartyCast button on each speaker, and the indicator light will turn white.
3. You'll hear a prompt indicating successful pairing.
Lighting Effect Related
Press and hold the BassUp button for about two seconds to change light effects.
Boom 2 has seven preset light effects.
Double-click the BassUp button to turn off light effects.
1. Do not completely discharge the battery before recharging.
2. Recharge the battery as soon as possible when the low-battery indicator is on.
3. Stop charging once the battery is fully charged.
4. Do not expose the speaker to harsh environments with extremely hot or cold
temperatures.
5. Recharge the speaker regularly (once every 3 months) if it has not been used for a
prolonged period.
Documents & Drivers
1. soundcore Boom 2 Speaker
2. 60 cm USB-C to C Cable
3. Quick Start Guide
Note: Wall charger not included.
Boom 2 supports up to 24 hours of playtime at 50% volume with BassUp and light effects turned off. Battery life will vary depending on the content being played, custom EQs, volume level, etc
The power indicator is red when charging and white when fully charged. When the battery level is below 10%, the power button indicator light will flash red.
soundcore Boom 2 features IPX7 waterproofing and floating, but before submerging it in water, make sure to seal the waterproof cover tightly.
It takes around 5.5 hours to charge with a certified 5V/3A (15W) wall charger.
Boom 2 has a built-in woofer and two tweeters.
No.
60W as standard, but it can reach up to 80W in BassUp 2.0 mode.
On Boom 2, BassUp 2.0 not only boosts the bass at the touch of a button, but also
increases the speaker's output to 80W.
Turn on Boom 2, then hold down the Bluetooth and Volume + buttons for 5-10 seconds.
You'll hear a prompt and the speaker will automatically restart
Yes, Boom 2 is equipped with a microphone.
Boom 2 has a 5W charging output.
Boom 2 supports the SBC Bluetooth codec.
Bluetooth 5.3.
Spécifications
| Son | Son de basse ultra-profond |
| Puissance de son | 80W (60W Standard) |
| Étanchéité | IPX7 |
| Temps d'écoute | 24 Hours |
| Version Bluetooth | 5.3 |
| multiples enceintes | PartyCast 2.0 / TWS |
| Charger | ✔️ |
| Recommandé pour | bateau, plage, camping |













































