Question 1

How to Install Netflix?

Accepted Answer

Question 2

How to Use Chromecast Airplay

Accepted Answer

Question 3

Signal Input and Output

Accepted Answer

Question 4

Auto and Manual Keystone Correction

Accepted Answer

Question 5

Auto and Manual Focus

Accepted Answer

Question 6

How Do I Pair the Remote with Capsule 3 Laser?

Accepted Answer

1. During setup, press OK and the \"-\" volume button at the same time when instructed.2. While pairing, point the remote at the infrared receiver. Go to Settings > Remotes & Accessories to search and pair. Note: The distance between the remote and projector should not exceed 33 ft / 10 m.

Question 7

How Do I Upgrade the Firmware?

Accepted Answer

Go to Settings > Device Preferences > About > System update > Check Updates.

Question 8

How do I Find the Capsule 3 Laser Serial Number?

Accepted Answer

1. Go to Settings > Device Preferences > About > Status > Serial Number.2. Find the silver sticker on the package. It will begin with D2426xxxxx.

Question 9

How Do I Find the Capsule 3 Laser MAC Address?

Accepted Answer

Go to Settings > Device Preferences > About > Status > Device MAC Address.

Question 10

How Do I Pair Bluetooth Devices with Capsule 3 Laser?

Accepted Answer

Go to Settings > Remotes & Accessories.

Question 11

How Do I Factory Reset Capsule 3 Laser?

Accepted Answer

Go to Settings > Device Preferences > Factory Reset.

Question 12

How Do I Restart Capsule 3 Laser?

Accepted Answer

Go to Settings > Device Preferences > Restart.

Question 13

How Do I Connect External Speakers to Capsule 3 Laser?

Accepted Answer

1. Via AUX Cable- Use a 3.5 mm audio cable or an adapter (not provided) to connect your external speaker.- Connect the other end of the audio cable to the projector AUX port.- You will hear audio from your external speaker.2. Via Bluetooth- Go to Settings > Remote & Accessories > Add Accessory.Note: When connected to speakers or headphones, the projector's built-in speaker system is disabled.

Question 14

How Do I Zoom In/Out with Capsule 3 Laser?

Accepted Answer

Go to Settings > Projector Settings > Image Correction > Zoom.

Question 15

How Do I Switch to Bluetooth Speaker Mode on Capsule 3 Laser?

Accepted Answer

1. Press the Mode button on Capsule 3 Laser.2. Go to Settings > Bluetooth Speaker Mode to switch projector modes. Then go to your phone's Bluetooth settings to pair with Capsule 3 Laser.Note: After connecting, the projector light will turn off for a brief time. When finished with Bluetooth Speaker Mode, press the back button on top of Capsule 3 Laser.

Question 16

How Do I Mirror or Stream Video From iOS Devices to Capsule 3 Laser?

Accepted Answer

First, install Airscreen on your projector from the Google Play Store.Once completed, follow these steps to mirror or stream video from your iOS device.Screen Mirroring From iPhone or iPad1. Make sure that your iOS device and Capsule 3 Laser are on the same Wi-Fi network. Your phone's hotspot is also OK.2. Swipe to display the Control Center and tap the AirPlay icon. 3. Select Capsule 3 Laser as the device you want to cast to.Screen Mirroring From Mac1. Make sure that your Mac and Capsule 3 Laser are on the same Wi-Fi network. Your phone's hotspot is also OK.2. Click the AirPlay icon on the Mac and select your projector to start mirroring. The AirPlay icon in the menu bar will turn blue when AirPlay is active.3. To stop mirroring, click the AirPlay icon again and then select Turn AirPlay Off. Note: For MacBook Air, MacBook Pro, and iMac, the AirPlay icon will only be displayed in the menu bar when AirPlay mirroring is available.Streaming Video From iPhone or iPad1. Make sure that your iOS device and Capsule 3 Laser are on the same Wi-Fi network. Your phone's hotspot is also OK.2. Open the streaming apps you want to cast to Capsule 3 Laser and select a video to play. 3. Click the AirPlay or cast icons in the top right corner to cast to the projector.

Question 17

How Do I Mirror or Stream Video From Android Devices to Capsule 3 Laser?

Accepted Answer

Capsule 3 Laser supports Chromecast, so you can mirror or stream videos from your Android devices that use Chromecast. Note that Chromecast uses a Wi-Fi connection, not a Bluetooth connection. Also note that copyrighted content CANNOT be mirrored or cast. If you want to watch Netflix, you can directly download it from Nebula Manager onto your projector.For a guide to mirror or stream videos, please follow these instructions:Screen Mirroring1. Make sure your Android device and Capsule 3 Laser are on the same Wi-Fi network. You can use your phone's hotspot.2. Go to Settings > Connected Devices > Connection Preferences > Cast.3. Select Capsule 3 Laser as the device you want to cast to.Streaming Videos1. Make sure your Android device and Capsule 3 Laser are on the same Wi-Fi network. You can use your phone's hotspot. Then use Chromecast to stream.2. Open the app you want to stream from. Note that Chromecast can only open apps that support Chromecast, such as YouTube and Prime Video. For more information about apps that support Chromecast, install the Google Home app onto your phone.3. While the video is playing, click the Chromecast button at the top to search for a Chromecast compatible device. Select Capsule 3 Laser.

Question 18

How Do I Stream Video From a Windows 10 PC to Capsule 3 Laser?

Accepted Answer

Use the Chrome browser to stream videos from a Windows 10 PC to your projector. Here's how:1. Make sure your Windows 10 PC and projector are connected to the same W-Fi network. You can use your phone's hotspot.2. Open Chrome on your Windows 10 PC. In the top right corner of Chrome, go to More > Cast.3. Choose the device you want to watch content from, and then watch it on your projector.

Question 19

How Do I Mirror From a Windows 10 PC to Capsule 3 Laser?

Accepted Answer

Use screen casting software to mirror from a Windows 10 PC to your projector. Here's how:1. Keep your Windows PC and Capsule 3 Laser connected to the same network.2. Download screen casting software such as EZCast on your Windows PC and Capsule 3 Laser.3. Open the screen casting software and click the Cast icon in the top right to cast to Capsule 3 Laser.

Question 20

How Do I Play Movies From My USB with Capsule 3 Laser?

Accepted Answer

To play from a USB storage device:1. Download the File Manager app from Google Play.2. Insert the USB storage device into the projector.3. Select the music, videos, or photos from the USB drive that you want to play.4. Open them with a multimedia player app. If you don't have an app, download one from Google Play.Note:The maximum supported memory capacity of your USB storage device is 4TB.

Question 21

How Do I Play Videos Without Wi-Fi?

Accepted Answer

1. Download videos to a USB drive.2. Install the File Explorer app from the Google Play Store on Capsule 3 Laser.3. Install a media player app.4. Connect your USB drive that is in FAT32 format and play videos stored on the USB drive

Question 22

How Do I Activate Capsule 3 Laser’s Autofocus?

Accepted Answer

1. Slightly move the projector or press and hold the autofocus button for 2-3 seconds to trigger.2. To manually adjust, press the volume +/- buttons while autofocusing.

Question 23

What is Capsule 3 Laser's Projection Distance?

Accepted Answer

The distance between the projector and the projection surface must be a minimum of 5 ft (1.52 m) and a maximum of 13.85 ft (4.22 m). This ensures a projection image between 60\" and 150\". For best results, set the projector between 5'3\"-8'9\" (1.6 m - 2.6 m) away.Screen Size Distance Between Projector Lens and Screen 60\" - 1.68 m /  5.51 ft70\" - 1.97 m / 6.46 ft80\" - 2.25 m / 7.38 ft90\" - 2.53 m / 8.30 ft100\" - 2.81 m / 9.22 ft110\" - 3.10 m / 10.17 ft120\" - 3.37 m / 11.06 ft130\" - 3.65 m / 11.98 ft140\" - 3.93 m / 12.89 ft150\" - 4.22 m / 13.85 ft

Question 24

How Do I Use Nebula Connect?

Accepted Answer

Nebula Connect allows you to easily control your projector. Here's how to use it:1. Download Nebula Connect from the Google Play Store or the App Store on your phone.2. Make sure your phone's Bluetooth is on, turn on your Nebula projector, and then open Nebula Connect.3. Select the Nebula projector you want to connect to your phone.4. With Nebula Connect, slide to move, tap to confirm, and scroll with two fingers.

Question 25

How Do I Adjust the Brightness of Capsule 3 Laser?

Accepted Answer

1. Capsule 3 Laser will automatically switch to a lower brightness mode when it is not charged in order to save battery.2. If you want a brighter image, go to Settings > Projector Settings > Brightness > Standard Mode or go to Settings > Projector Settings > Brightness to manually adjust it.

Question 26

How Do I Use Manual Keystone Correction?

Accepted Answer

Activate Manual Keystone Correction and enter the mode. Adjust each point to achieve a perfect circle.

Question 27

I Can't Connect to Nebula Connect. What Do I Do?

Accepted Answer

Try the following steps to see if they help:1. Uninstall Nebula Connect.2. Update the Capsule 3 Laser firmware to the latest version. Go to Settings > Device Preferences > About > System update > Check Updates.3. Go to your phone's Bluetooth settings and remove your pairing with your projector.4. Restart your phone.5. Reinstall Nebula Connect and try connecting again.

Question 28

Can I Sideload Android Apps to Capsule 3 Laser?

Accepted Answer

Yes, you can download more than 7,000 native apps from Google Play directly to Capsule 3 Laser. For apps not available on Google Play, download the APK file to a USB drive to install on Capsule 3 Laser. Make sure the File Explorer app is installed on Capsule 3 Laser so your USB drive is recognized.

Question 29

What Should I Do If My HDMI Has No Signal?

Accepted Answer

1. Use a different HDMI cable.2. Connect your projector with another device with your HDMI cable.3. Disconnect from your projector and try connecting your device with your TV via HDMI.4. Adjust the HDMI output resolution/Hz of the connected device to match your projector.

Question 30

What Should I Do If My Projector Has No Sound?

Accepted Answer

Try the following steps to see if they help:1. Switch between various projection modes to see if your projector can play sound. 2. Hit the Volume Up button on top of your projector.3. Restore the default settings of the projector. Go to Settings > Devices Preferences > Restart.4. In Projection Mode, connect your projector to an external Bluetooth speaker. Go to Settings > Remotes & Accessories > Add Accessory.

Question 31

What USB Drive Formats are Supported?

Accepted Answer

FAT32

Question 32

What Ports Are On Capsule 3 Laser?

Accepted Answer

USB-C / HDMI ARC / AUX

Question 33

How Do I Install Netflix on Nebula Capsule 3 Laser?

Accepted Answer

1. Go to the Google Play Store. Search for the Nebula Play app and install it on your projector.2. Download Netflix.3. Install File Explorer/File Manager from the Google Play Store.4. Install the Netflix APK via File Explorer/File Manager. Go to Device > Local > Download. 5. Netflix is ready to use.NoticeNetflix will appear in the second position on the Nebula Play channel of home screen.

Question 34

How Do I Control Netflix on Nebula Capsule 3 Laser?

Accepted Answer

1. Install Nebula Connect on your phone and connect with Capsule 3 Laser.2. Select Mouse mode. Use one finger to move and click or two fingers to scroll.

Question 35

How Do I Keep the Battery From Discharging Quickly?

Accepted Answer

1. Set the brightness to 50%.2. Select Battery Mode via Settings > Projector Settings > Image Mode > Battery Mode.

Question 36

My Projector Won't Power On or Charge. What Do I Do?

Accepted Answer

1. Try a different Power Delivery charger (at least 30W) and USB-C charging cable to recharge it.2. If the battery is fully depleted, charge the device for 15-30 mins to see if the power button light turns on.

Question 37

What Do I Do if Capsule 3 Laser Can't Connect to Wi-Fi?

Accepted Answer

1. Place Capsule 3 Laser and your router within 16 ft / 5 m of each other. Test if other devices can connect to Wi-Fi.2. Try a different Wi-Fi network or connect to your phone's hotspot.3. Try your router's 2.4GHz and 5GHz settings.4. Reset Capsule 3 Laser by going to Settings > Device Preferences > Factory Reset.

Question 38

The Capsule 3 Laser Firmware Update Failed. What Do I Do?

Accepted Answer

1. Try a stronger Wi-Fi network or your phone's hotspot.2. Contact our Support Team for assistance.

Question 39

What Do I Do If My App Crashes?

Accepted Answer

1. Try another Wi-Fi network and update the firmware.2. Check if your time zone is accurate via Settings > Device Preferences > Date & Time.3. Clear data via Settings > Apps > See All Apps > (App Name) > Clear Data / Clear Cache.4. Reset Capsule 3 Laser via Settings > Device Preferences > About > Factory Reset.

Question 40

What Do I Do If My USB Device Isn't Recognized?

Accepted Answer

1. Install the File Explorer app from the Google Play Store.2. Make sure the USB drive has a FAT32 format.3. Download an mp3 to the USB drive and connect it with Capsule 3 Laser to see if it plays.4. Test another USB drive.

soundcore Nebula Capsule 3 Laser | Laser-Powered Mini Projector

Setup's Done in 3 Seconds

Laser Bright, Anytime

Next-Generation Entertainment

FAQ

How to Install Netflix?

How to Use Chromecast Airplay

Signal Input and Output

Auto and Manual Keystone Correction

Auto and Manual Focus

Customer Reviews