Question 1

How do I turn off Motion Boom Plus’s voice prompts?

Accepted Answer

1. Connect your device to Motion Boom Plus.
2. Open the soundcore app.
3. Press \"...\" in the top right corner to access more options.
4. Turn off voice prompts.

Question 2

How do I upgrade Motion Boom Plus’s firmware via the soundcore app?

Accepted Answer

1. Open the soundcore app and press 'Update Firmware'.
2. Do not use your phone while the firmware is updating, except if you’ve set the soundcore app to run in the background.
3. Motion Boom Plus will restart automatically after upgrading.

Question 3

How do I reset Motion Boom Plus?

Accepted Answer

Turn on the speaker, then hold the Bluetooth and Volume + buttons for 5-8s.

Question 4

I haven't used Motion Boom Plus for a while, why won't it turn on?

Accepted Answer

If you haven't charged or used Motion Boom Plus in a long time, the battery may be over-discharged. Charge for at least one hour before turning it on.

Question 5

Will Motion Boom Plus sink if it is dropped in water?

Accepted Answer

No, Motion Boom Plus can float on the surface of the water.

Question 6

How do I pair 2 Motion Boom Plus speakers together wirelessly via TWS?

Accepted Answer

1. Turn on 2 Motion Boom Plus speakers and connect either one to your device via Bluetooth.
2. Hold the Bluetooth button for 2-3s on both speakers until they flash white.
3. Wait for 3-5s until you hear 'ding' sound. This means they are successfully paired. 
4. Once paired, the primary speaker will show a solid blue light, while the secondary speaker will show white light.

Question 7

Does Motion Boom Plus have a built-in microphone?

Accepted Answer

Yes.

Question 8

How do I pair 2 Motion Boom Plus speakers together wirelessly via PartyCast?

Accepted Answer

1. Turn on 2 Motion Boom Plus speakers and connect one to your device via Bluetooth.
2. Press the PartyCast button on both speakers and you will see a solid white light.
3. Wait for 3-5s until you hear a 'ding' sound. This means they are successfully paired. 
4. Once paired, the primary speaker will show solid white light, while the secondary speaker will show white light.

Question 9

What do the indicator lights mean during charging?

Accepted Answer

- Solid red light while charging. 
- Solid white light when fully charged.

Question 10

Can I use Motion Boom Plus as a battery to charge other devices?

Accepted Answer

Yes. There is a USB-A port for charging other devices.

Question 11

How to recharge the speaker?

Accepted Answer

You can use a USB-C wall charger with 5V/3A output to recharge.

Question 12

How long does it take to fully recharge Motion Boom Plus?

Accepted Answer

By using a 5V/3A USB-C wall charger, you can recharge to 100% in 5.5 hours.

Question 13

What should I do if the speaker is not charging?

Accepted Answer

To fix the charging issue, you can try the following steps:
1. Wipe clean the tip of the charging cable.
2. Try using a different cable or wall charger (5V/3A output) to recharge the speaker.
3. Reset the speaker.
4. Recharge for at least half an hour to prevent over-discharge.

Question 14

What does it mean when the light flashes red?

Accepted Answer

It means the battery is low.

Question 15

What should I do if I fail to pair the speaker with my phone?

Accepted Answer

1. Confirm that the speaker is fully charged and not paired with other devices.
2. Forget all Bluetooth pairing records on your device.
3. Reboot your speaker and your device.
4. Disable and enable Bluetooth on your device.
5. Reset the speaker.
6. Try to connect the speaker to another device.

Question 16

Is a PIN or Password needed when pairing soundcore Motion Boom Plus with a device?

Accepted Answer

A PIN or password is not needed when pairing a soundcore speaker with a device. Hence, if you encounter an issue during the pairing process, please try these steps:
1. Confirm that soundcore Motion Boom Plus is fully charged and not connected to other devices.
2. Forget all Bluetooth pairing records on your device.
3. Reboot your soundcore Motion Boom Plus and your device.
4. Disable and then enable Bluetooth on your device.
5. Reset soundcore Motion Boom Plus by holding the Bluetooth and Volume+ buttons at the same time for 5-10s until Motion Boom Plus restarts.
6. Connect soundcore Motion Boom Plus to a different device.

Question 17

How do I fix soundcore Motion Boom Plus's noise issues？

Accepted Answer

1. Confirm that the speaker is fully charged.
2. Reset the speaker.
3. Reboot your speaker and your device.
4. Try connecting the speaker to another device. If possible, try using another app or audio source.
5. Ensure there are no physical objects interfering with the Bluetooth connection from the speaker to the device, such as a doorway or wall.

Question 18

What should I do if soundcore Motion Boom Plus doesn't make any sound?

Accepted Answer

1. Confirm that the speaker is fully charged.
2. Reset the speaker.
3. Restart your speaker and the device it is paired with to test again.
4. Try connecting the speaker to a different device. If possible, try another app or audio source.
5. Make sure the volume on both the speaker and the paired device are turned up.

Question 19

How do I fix the no sound issue when soundcore Motion Boom Plus is paired with other PartyCast1.0 speakers?

Accepted Answer

Double press the PartyCast button on soundcore Motion Boom Plus.

Model	Clip-On
Drivers	12mm Customized Driver
Playtime	8H / 32H
Sound	Unmatched Sound, Rich Bass
Water Resistance	IPX4
Bluetooth Version	Bluetooth 5.4
Fast Charging	10 Mins = 3 Hrs
Calls	4 Mics with AI
Multipoint Connection	✔️
Weight	5.9 g (0.19 oz)
Design	Non-Intrusive Open-Ear Clip-On
Control	Tap Control
Secure Fit	Flexible Open-Ring Design

AeroClip | Open-Ear Clip-On Earbuds with Adaptive Comfort

Overview

Sound Out In Style

Innovative Flexible Open-Ring Design

3× Clearer Calls

Unmatched Sound, Powerful Bass

Choose Your Own Fit

Tap into Full Control

IPX4 Water-Resistant

How to Use Your AeroClip

Specs

FAQ

How do I turn off Motion Boom Plus’s voice prompts?

How do I upgrade Motion Boom Plus’s firmware via the soundcore app?

Customer Reviews