Liberty 2 Pro

Liberty 2 Pro comes with IPX4, which can resist sweat. In order to protect the electronics inside and ensure the best sound quality, we suggest you wipe away sweat after use and not use in wet conditions.

No.

1. Go to the Apple Appstore or Google Play to download the Soundcore App.
2. Pair your device with Liberty 2 Pro.
3. Open the Soundcore App to connect with your Liberty 2 Pro.
4. Click on the Custom Command button in the lower right corner to enter the Custom Command page.
5. Customise the settings according to your preferences; choose to double-click or hold for 1s to control volume up/volume down, then use the settings to adjust the volume.

Note: Customised commands are not available in Mono mode.

- The right earbud is the default master side, while the left is the slave.

- While listening to music, if you turn off the right earbud by putting it into the charging case and closing it OR holding down the button on the right side for 5s, the left earbud will automatically become the master.

- If you'd like to use the left earbud only when making calls, you can turn off the right earbud or hold down the button on the left side for 1s to switch the left earbud to the master while the right side is on.

1. Clean the contact pins using a clean cloth dipped in alcohol-based disinfectant. Put the cloth on the end of a toothpick for precise cleaning.
2. Clean the metal filter with a dry cotton swab. Remove any debris from the metal filter with a clean, dry, soft-bristled brush.
3. Do not use sharp objects or abrasive materials to clean Liberty 2 Pro.
4. Do not let water get inside Liberty 2 Pro.

A full charge takes up to 1.5 hours.

A full charge takes up to 2 hours.

The case can fully recharge the earbuds up to 3 times when the case itself is fully charged.

Yes, Liberty 2 Pro's case can be charged using Qi-certified wireless chargers.

Approximately 8 hours at 60% volume.

1. Confirm the charging case has power left (press the button on the case and note if an LED is illuminated).
2. Remove all protective film from charging contact pins and ensure all charging contact pins on the earbuds and charging case are completely clean and dry of sweat and water. Then put earbuds correctly into the case.
3. Connect the case with the included USB cable and plug it into a USB power source.

1. Make sure your wireless charging pad is Qi-certified.
2. The most effective wireless charging area is on the center of the bottom of the case. Make sure this area is aligned with the charging pad.

- After the box is closed, the left and right LEDs flash to indicate that the left and right earphones are in contact with the pins in the case. If only one of the lights is displayed, it indicates that the earbud in the corresponding position is in good contact with the pin, whereas the other earbud is either not in the case or is not making contact with the pin.
- The light in the middle is not illuminated by default.

This feature is currently not supported.
If you want to pair Liberty 2 Pro with a second device, please use one of the following methods:
Turn off Bluetooth on the current device, the earbuds will enter into pairing mode.
Or
Place the earbuds back into charging case and keep the case open, tap and hold the button at the back of the case for 3 seconds until the right earbud's LED flashes white rapidly. The earbuds will disconnect from the current device and enter pairing mode.

Place the earbuds back into the charging case and keep the case open, tap and hold the button at the back of the case for 10 seconds until both the earbuds' LED lights flash red 3 times. This will clear the pairing information and restart automatically.

1. When connecting to a mobile device for the first time, there is a pop-up window for you to confirm pairing. Please select "pair".
2. Place the earbuds back into the charging case and close the case. Slide open the case and the earbuds will automatically power on and pair with each other before connecting to the last paired device.
3. If they do not connect, please try to reset your earbuds. See "How do I reset Liberty 2 Pro?"
4. Forget the pairing record on your device, turn off the Bluetooth and turn in on again to pair it with your earbuds.
5. Try to pair them with another device.

While the range of most Bluetooth devices is 33 feet (10 meters), the optimal range for any Bluetooth audio device is about 2 feet (60 centimeters) from the audio source.

Some environments (such as airports, offices, crowded public spaces etc.) can interfere with your Bluetooth connection.

Optimizing your Bluetooth connection:
1. If you are in a busy place, ensure your phone is on your right side when using Liberty 2 Pro.
2. Download videos and songs instead of streaming.
3. If you have an Android phone, temporarily disable unnecessary apps running in the background.

1. Reset the earbuds. See "How do I reset Liberty 2 Pro?"
2. Close apps that are running in the background.

1. Check that there is a flashing white light on both the earbuds when they turn on.
2. If you can't see a flashing white light on both the earbuds, see "How do I reset Liberty 2 Pro?".

- Liberty 2 Pro only disconnect from your device when the charging case is fully closed. When the case is opened they will appear in your device's Bluetooth menu.
- The button on the earbuds won't work when the earbuds are being charged in the case.
- If they still connect to your device after the charging case cover is closed, make sure the earbuds are in the correct postion and clean the contact pins.

- As the buds support Master/Slave switch, both of them can be paired to your phone as a master device. When the right earbud is the master, the Bluetooth name is Liberty 2 Pro, when left earbud is the master the Bluetooth name is Liberty 2 Pro-L.

- If you would like to use the left side only, please put the right side in the charging case and close the charging case cover. Select "Liberty 2 Pro-L" to pair.

SBC, AAC, and aptX

No, it doesn't.

1. Delete the pairing record and reconnect Liberty 2 Pro again.
2. When you use Liberty 2 Pro for a call on your computer, you may need to select them as the default playback and output device. This can be found in your computer's audio settings.
3. Update your computer's Bluetooth driver or buy a Bluetooth adapter that is compatible with your computer.

- HearID tests both your left and right ears over approximately 5 minutes. Do not release the button during the test to ensure that the test is completed successfully.
- During the HearID test, there will be a humming sound in the earbuds. Hold the button on the app while you can hear the noise. When you stop being able to hear the noise, release the button.
- If you release the button while you can still hear the sound, the results will be inaccurate.

It is caused by pressing the buttons on the earbuds. Do not touch the earbuds during the HearID test to make sure it isn't interrupted.

The product must not be disposed of in your household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of old products and rechargeable batteries in your normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health. Please note that the battery should only be removed by professional engineers. You are welcomed to contact us at service@soundcore.com if you have any questions.