Boom 2 | Portable Bluetooth Speaker for Bass

1. soundcore Boom 2 Speaker 2. 60 cm USB-C to C Cable 3. Quick Start Guide Note: Wall charger not included.

Boom 2 supports up to 24 hours of playtime at 50% volume with BassUp and light effects turned off. Battery life will vary depending on the content being played, custom EQs, volume level, etc

The power indicator is red when charging and white when fully charged. When the battery level is below 10%, the power button indicator light will flash red.

soundcore Boom 2 features IPX7 waterproofing and floating, but before submerging it in water, make sure to seal the waterproof cover tightly.

It takes around 5.5 hours to charge with a certified 5V/3A (15W) wall charger.

Boom 2 has a built-in woofer and two tweeters.

No.

60W as standard, but it can reach up to 80W in BassUp 2.0 mode.

On Boom 2, BassUp 2.0 not only boosts the bass at the touch of a button, but also increases the speaker's output to 80W.

Turn on Boom 2, then hold down the Bluetooth and Volume + buttons for 5-10 seconds. You'll hear a prompt and the speaker will automatically restart

Yes, Boom 2 is equipped with a microphone.

Boom 2 has a 5W charging output.

Boom 2 supports the SBC Bluetooth codec.

Bluetooth 5.3.

TWS stands for True Wireless Stereo, and it allows two identical speakers to play stereo sound after pairing up. soundcore Boom 2 supports TWS.

1. Turn on both speakers, 2. Long press the Bluetooth button on both speakers until the indicator light flashes white. 3. You'll hear a sound to indicate successful pairing. The indicator light on the main speaker will be blue, and the indicator light on the secondary speaker will be white. The main speaker functions as the left channel, and the secondary speaker functions as the right channel.

PartyCast 2.0 lets you connect up to 100+ PartyCast-enabled Bluetooth speakers. Boom 2 supports PartyCast 2.0 functionality.

1. Turn on two PartyCast 2.0 devices. 2. Press the PartyCast button on each device, and the indicator light will turn white. 3. You'll hear a prompt indicating successful pairing.

1. Turn on the Boom 2 and connect it to your phone. 2. Turn on the secondary speaker, ensuring that it is not connected to the phone. 3. Briefly press the PartyCast button on the main speaker until you hear a prompt, then immediately press the PartyCast button twice quickly to revert to PartyCast 1.0. 4. Long press the Bluetooth button on the secondary speaker to enter PartyCast pairing mode. At this point, the Bluetooth indicator light will change from flashing blue to flashing white. Double-press the Bluetooth button to enter PartyCast secondary speaker mode, and the Bluetooth indicator light will change from slow flashing white to fast flashing white. 5. When the secondary speaker's Bluetooth light turns white, PartyCast pairing is successful.

1. Turn on both speakers. 2. Press the PartyCast button on each speaker, and the indicator light will turn white. 3. You'll hear a prompt indicating successful pairing.

Press and hold the BassUp button for about two seconds to change light effects.

Boom 2 has seven preset light effects.

Double-click the BassUp button to turn off light effects.

1. Do not completely discharge the battery before recharging. 2. Recharge the battery as soon as possible when the low-battery indicator is on. 3. Stop charging once the battery is fully charged. 4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures. 5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.